Step configurations and options

Straight entry steps

Clean, modern runs to front doors or side entries. Ideal for narrow approaches and townhomes.

L‑shape and wrap‑around steps

Turn corners gracefully and make room for planters or railings. Works well where doors swing toward stairs.

Curved concrete steps

Soft radius faces complement landscaping and create a generous welcome zone.

Integrated landings and porches

Combine a small patio with your stair set for space to pause, place packages, or style seating.

Monolithic pours

Stairs and landings poured as one with the slab for strength and a clean look where feasible.

Separate precast treads (on request)

For certain retrofits and tight access, precast elements can be set on prepared footings.

Finishes that balance traction and style

Broom finish:

The Victoria standard for safe footing in wet months; subtle texture that hides wear.

Light sandblast or exposed aggregate:

Premium look with natural stone or micro‑texture; excellent slip resistance.

Smooth/trowel with micro‑texture:

Clean, modern surface suitable for low‑slope treads and protected entries.

Stamped and coloured concrete:

Slate, ashlar, or wood‑plank textures; add contrasting borders or riser bands for detail.

Edge details & accents:

Crisp nosings, chamfered or rounded edges, picture‑frame borders, saw‑cut panel lines, integral colour, and decorative banding.

Safety, code awareness, and railings

• Riser & tread proportions: We size risers and treads for comfortable climbing and consistent rhythm. Typical residential ranges are confirmed during design.
• Landing requirements: We include level landings at doors and necessary breaks on long runs.
• Handrails: We install railing bases or sleeves during the pour for a strong, tidy attachment. Your choice of metal or wood railing supplied/installed to suit the project scope.
• Drainage & snow‑shedding: We pitch treads slightly and detail nosings to prevent standing water.

Note: Municipal codes and strata guidelines vary. We’ll advise on local expectations and recommend confirming final compliance with the appropriate authority.

Our concrete steps installation process

1. Site visit & quote
   We assess grades, door thresholds, soil, and access. You receive a fixed‑price quote with configuration, finish options, and timeline.
2. Design & layout
   We confirm rise/run, number of steps, landings, width, and railing details. Control/expansion joints are planned to manage movement and maintain clean lines.
3. Excavation & base prep
   Old steps removed if required. We excavate to depth, place and compact a granular base, and set forms to true grade and square corners (or radius for curves).
4. Reinforcement & embeds
   Rebar or mesh placed per design. We set sleeves/anchors for future railings, lighting conduit, or heat‑trace as needed.
5. Pour & finish
   Concrete is placed and consolidated to avoid voids, then treads and risers are tooled sharp and consistent. We apply your chosen finish and edge details.
6. Curing & sealing
   Controlled curing builds strength and reduces surface dusting. Decorative surfaces can be sealed after proper cure for colour depth and protection.
7. Clean‑up & walkthrough
   We leave the site tidy, review maintenance, and provide workmanship warranty details.

Typical specs (guideline)

• Thickness: 100–150 mm slabs; risers and treads formed to design. Thicken footing pads where soils or loads require.
• Reinforcement: Fibre‑reinforced mixes plus rebar cages or mesh depending on geometry.
• Heavier‑duty options: Extra rebar, deeper footings, and air‑entrained mixes for exposed locations.

We’ll recommend the right specification after inspection of soils, exposure, and use.

Built for Victoria’s climate

• Drainage‑first step geometry moves water off treads.
• Freeze–thaw awareness with properly spaced joints and air‑entrained mixes to reduce random cracking and surface scaling.
• High‑traction textures like broom and exposed aggregate for reliable footing in wet conditions.
• Breathable sealers suited to coastal UV and winter moisture.

Add‑ons that elevate your entry

• Matching walkways and driveway borders for a cohesive front approach.
• Lighting integration with conduit or recessed riser lights for safety and style.
• Heated pads or snow‑melt prep on critical exterior stairs (on request).
• Planter edges or seat walls poured with the landing for a custom look.

Replacement, retrofits, and repairs

If your steps are settled, cracked, or separating from a landing, we can remove and replace them with improved base and reinforcement. For certain situations, partial rebuilds or overlays may be feasible after inspection; we’ll recommend the option with the best long‑term value and safety.

Care & maintenance

• Initial cure: Light foot traffic after ~24–48 hours; avoid heavy loads for 5–7 days (weather‑dependent).
• Cleaning: Rinse as needed; use mild detergent and a soft brush for spills. Avoid harsh de‑icers; use sand for traction.
• Reseal schedule: Decorative surfaces typically reseal every 2–3 years depending on sun exposure and use.
• Winter tips: Use plastic shovels and door mats; place fire bowls or planters on stands to prevent ring marks.

Areas we serve

We build concrete steps throughout Greater Victoria: Victoria (Downtown, James Bay, Fairfield, Fernwood, Oaklands, Rockland), Saanich (Gordon Head, Royal Oak, Broadmead, Quadra, Tillicum), Oak Bay, Esquimalt, and Westshore communities including Langford, Colwood, and View Royal. We also consider nearby Vancouver Island locations on request.